Keyboard shortcuts
All HAM-Tools shortcuts at a glance. Most are also listed in the menus, right next to the command they trigger.
Opening windows
All under the Window menu. Each window exists only once; invoking it again brings the existing one to the front from 1.56. Up to 1.55, a second ⇧⌘G, for example, opened another grayline window.
| Shortcut | Window |
|---|---|
| ⇧⌘D | DX cluster |
| ⇧⌘C | Contest cluster |
| ⇧⌘M | DX map from 1.57 |
| ⇧⌘A | DX Assistant from 1.59 |
| ⇧⌘G | Grayline |
| ⇧⌘N | Forecasts (NVIS and skip lights) from 1.61 |
| ⇧⌘E | Elevation profile (QTH locator) |
| ⇧⌘P | Band plan |
| ⌥⌘T | Cluster terminal |
| ⌥⌘G | Gateway directory (Winlink) |
Bandmaps
The per-band bandmap windows are also in the Window menu, but deliberately have no shortcuts of their own — otherwise ten combinations would be taken. There is one window per band; several bands can be open side by side.
Transceiver (CAT)
| Shortcut | Command |
|---|---|
| ⇧⌘T | Connect / disconnect CAT |
| ⌃⇧⌘R | Reset CAT (Control + Shift + Command + R) |
Grayline
| Shortcut | Command |
|---|---|
| ⌘N | Jump to now |
Winlink
| Shortcut | Command |
|---|---|
| ⇧⌘R | Send & Receive (while the Winlink module is in front) |
| ⌘S | Save message as draft |
| ⌘⏎ | Put message into the outbox |
| ⌘W | Close the Compose window — unsaved changes end up in “Drafts” |
| ⌫ | Delete the selected message (asks first in the trash) |
QSO entry and macros
Applies in all entry forms — DX, contest and outdoor (POTA, SOTA, WWFF, BOTA, LLOTA, WCA, GMA).
| Shortcut | Command |
|---|---|
| ⏎ | Log the QSO. The log button in the DX and outdoor forms shows “↩” for it (in the DX form wrongly “⌘↩” up to 1.55) from 1.56 |
| F1–F8 | Send macro slot 1–8 — in CW mode as CW via Hamlib send_morse, otherwise as an SSB voice recording with PTT from 1.56 |
| esc | Stop the running CW or SSB macro from 1.56 |
| ⏎ in the “Free-text CW” field | Send the text as CW instead of saving the QSO from 1.56 |
F1–F8 and Esc only work while CAT is connected, without modifier keys, in the window that holds the form. macOS must deliver the F keys as standard function keys (System Settings → Keyboard), otherwise hold fn as well. In CW mode Esc passes the key press on to the field after stopping. Without CAT, the DX and outdoor forms hide the macro row. Assign slots under Settings → Macros, more in the logbook.
Beacons (NCDXF) from 1.62
| Shortcut | Command |
|---|---|
| esc | "Stop" in the CAT panel: ends Follow Beacon / Hold Band; the rig returns to the frequency and mode from before the start unless you turned the dial yourself |
The module deliberately has no window shortcut — it lives in the sidebar. More in the Beacons module.
Repeaters from 1.63
| Shortcut | Command |
|---|---|
| Double-click on a row | To Rig: frequency, mode, offset and tone via CAT |
| Right-click on a row | To Rig, To Logbook, favourite, edit, delete, export selection |
| esc | close the editor or the import preview |
No window shortcut — the module lives in the sidebar. More in the Repeaters module.
Antenna Simulator
| Shortcut | Command |
|---|---|
| ⌘⏎ | Simulate |
General
| Shortcut | Command |
|---|---|
| ⌘, | Settings |
| ⌘? | Help (this site) |
| ⇧⌘B | Report a bug |
| ⌥⌘U | Check for updates |
In dialogs
The usual applies everywhere: ⏎ confirms the default action, esc cancels. In the QSO panel a plain ⏎ logs the entry — in the contest and outdoor forms as well; the exception is the “Free-text CW” field (see above).